Console House 10 Mode Instruções de Operação descarregar pdf (Página 56)

TELEPHONE CONTROL

Your Omni is equipped with a built-in telephone response feature that

allows you to control and access the status of your system from any

Touch Tone phone.

The Omni actually talks to you using a digital recording of an actual

human voice, so the sound is incredibly life like. You send

commands to the Omni using the keys of your Touch Tone telephone.

There are no tapes, discs, or other moving parts associated with the

speech and control features, so there is no maintenance or parts to

wear out.

There are two basic types of phones in use, those that dial using

pulses, (rotary dial phones are pulse type phones) and those that dial

using tones. You can tell the difference by listening to the receiver

when you dial: If you hear a repetitive clicking when you dial a

number like 8, its a pulse dialing phone. If you hear a tone when you

dial a digit, its a tone phone.

Only Tone phones will work with the Omni. Some phones have

switches that allow you to select Pulse or Tone. Set them to Tone to

work with the Omni. Only Tone phones can access your Omni.

You can still use pulse phones in your home when you have an Omni

installed, but Pulse phones cannot access your Omni.

NOTE:

There are two keys on your Touch Tone telephone that are

special. The # key (pound key, to the right of the zero), and the ' * '

key (star key, to the left of the zero). You will be using these keys.

Each time you pick up your telephone at home, the Omni will also

pick up the line and listen for a # (pound) key (the # key is the key to

the right of the zero on your touch tone phone). If the Omni does not

hear the # key within 3 seconds, it hangs up and does not listen in

Pulse and Tone

Phones

In-House Phones

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 135 136

Sem comentários

Console House 10 Mode Instruções de Operação Página 56