Console House 10 Mode Instruções de Operação descarregar pdf (Página 37)

To see the last command sent to a unit number by the Omni controller,

from the control menu, press the ' # ' key. The last command along

with any time (hh:mm:ss) remaining on a timed command will be

displayed.

Porch Light 1:22:10

LAST COMMANDED ON

At this point, one of the menu choices may be entered or the ' * ' or ' #

' key may be pressed to redisplay the menu.

The all on/off menu is used to turn all lights on and all units off. To

turn on all light modules, from the top-level display or from the main

menu, press the 4 (ALL) key on the console keypad.

At the ALL prompt, press the 1 (LIGHTS ON) key.

The console will beep, and a command will be sent that turns all Lamp

Modules on. Appliance Modules do not respond when the All Lights

On command is sent.

All X-10 unit numbers 1 - 32, by factory default, respond to the

All-On command.

NOTE: The All On and All Off functions can be changed, if desired -

See Set Up Misc, All On and All Off.

To turn off all modules (lamp and appliance modules included), from

the top-level display or from the main menu, press the 4 (ALL) key on

the console keypad, then press the 0 (OFF) key.

The console will beep, and a command will be sent that turns all

modules off. All X-10 units, by factory default, respond to the All-Off

command.

Status of a Unit

All On / Off

All Lights On

All Off

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 135 136

Sem comentários

Console House 10 Mode Instruções de Operação Página 37