Console House 10 Mode Instruções de Operação descarregar pdf (Página 49)

outside sirens are not activated) and the central station and/or voice

dialer is called.

The High and Low setpoints are changed as described for the PESM.

Use the zone number that the temperature sensor is connected to in

place of the unit number.

NOTE: Setting a High or Low temperature to 0 takes it out of service.

The Status function is used to display the status of various items in the

system. To enter the status menu, from the top level display or the

main menu, press the 6 (STATUS) key on the console keypad.

STATUS

1=CTRL 2=ZONE 3=SUN

↓

4=TEST 5=TEMP

↑

1 = CTRL (CONTROL UNITS)

The Control Status menu allows you to view and scroll through the

status of each control unit. To enter the Unit menu, from the Status

menu, press the 1 (CTRL) key in the console keypad. The system will

display:

DEN LAMP

LAST COMMANDED OFF

↓

You may enter a unit number to start displaying the status of that unit,

or simply press the down arrow key to scroll through the list of units.

The status display is as shown under Control, except that now the

arrow keys may be used to continue scrolling between units.

Porch Light 00:24:19

LAST COMMANDED ON

↓

You can also check the last commanded state and (if any) the

remaining time duration of any Unit.

Status

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 135 136

Sem comentários

Console House 10 Mode Instruções de Operação Página 49